AirsPops Airscream Pro Manual

AirsPops Airscream Pro Manual - Smoke Organic Store | SAs Premier Online Vape Shop

Are you new to vaping and looking to get started with the AirsPops Pro refillable vaping device? Don't worry, we've got you covered! Here's everything you need to know to get started and start enjoying the AirsPops Pro.

Learn how to put your new AirsPops Pro together, how to use your AirsPops Pro, how to refill your AirsPops Pro, and how to clean and maintain it!

How to Switch On your AirsPops Airscream Pro

The AirsPops Pro comes with all the components you need to get started vaping: the AirsPops Pro device itself, a 1.0 Ohm coil, a 2 ml cartridge, and a USB Type-C charging cable.

To assemble it, simply follow these steps:

  1. Insert the AirsPops Pro Coil into the AirsPops Pro Cartridge.
  2. Open the rubber lid of the AirsPops Pro Cartridge and fill it up with your favourite AirsPops 313 E-Liquid (compatible with all E-Liquids).
  3. Attach the AirsPops Pro Cartridge to the AirsPops Pro Device by pushing it in.
  4. Turn the device on by clicking the button of the AirsPops Pro Device FIVE times in quick succession. A light should flash indicating it is on.

How to Use your Airscream Pro

Once your AirsPops Pro is assembled and ready to go, here's how to use it:

To inhale, place your mouth on the mouth-piece of the cartridge and take a drag. There is no need to press and hold the power button while you draw on the mouthpiece.

To switch the device off, press the button FIVE times in quick succession.

How to Refill Airscream Pro

When it's time to refill your AirsPops Pro, follow these steps:

  1. Pull on the cartridge to remove it from the AirsPops Pro Device.
  2. Carefully open the rubber lid of the AirsPops Pro Cartridge.
  3. Refill the AirsPops Pro Cartridge with your favourite E-Liquid, for best experience use the official AirsPops 313 E-Liquid 30 ml Bottles.
  4. Seal the rubber lid of the AirsPops Pro Cartridge by pressing it closed.
  5. Re-insert the AirsPops Pro Cartridge into the AirsPops Pro Device.
  6. Wait 60 seconds before taking your first drag to ensure that the liquid settles into the cotton coil to avoid burning it.

How to Clean and Maintain your Airscream Pro

To keep your AirsPops Pro in good condition, make sure to clean and maintain it regularly. Here's how:

  1. Pull on the AirsPops Pro Cartridge from the AirsPops Pro Device and remove the cartridge.
  2. Clean the AirsPops Pro Cartridge, AirsPops Pro Coil, and AirsPops Pro Device with a damp cloth.
  3. Allow the AirsPops Pro Device to dry completely before reassembling.

Now that you know how to use and maintain the AirsPops Pro, you're ready to start vaping! Enjoy!


4 comments


  • Charl from The Smoke Organic Store

    @Dani, yes you can use any e-liquid with the Airscream AirsPops Pro!

    I will always recommend the 313 AirsPops E-Liquid though :) Its simply the best available on the market at this point.


  • Dani

    Hey, can you use any brand vape juice for the airpop pro? Or can you only use the 313 juice with the device?


  • Charl from The Smoke Organic Store

    Hi Jhon, the red light flashing indicates that your pod and coil are not making correct contact with the magnetic bits on the device.

    To fix this, you should use a Q-tip, Earbud, or tissue paper to carefully wipe down the metal connectors on the bottom of your pod (with the coil inside) as well as the magnetic metal connectors on the device where the pod connects to.

    The red light flashes usually due to liquid, rust, or dust covering the magnetic metal connection points. You may also need to replace your pod and coil as they may be burnt.

    Hope this helps!


  • jhon

    Hi , i need help with my device ?
    The red light keeps flashing and i’ve charged the device already. Also how do i know that it’s making correct contact?


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.