AirsPops Airscream Pro II Device Starter Kit

The Digital Display of the Airscream Pro II will tell you

• Battery Level of the device
• Number of puffs you've taken on the device
• The resistance (ohmage) of the coil you have in it

The adjustable airflow switch on the Airscream Pro II allows you to decide how much vapour and in turn flavour intensity you want when you're pulling on the device.

1. Peel off the silicone plug on the side.
2. Fill up the cartridge with e-liquid (we recommend the 313 AirsPops E-Liquids or any 40%-60% VG e-liquid).
3. Gently wipe off the overflow liquid.
4. After filling the e-liquid, wait at least 3 minutes for the coil to absorb the e-liquid before using it.

Press the side button 5 times in quick succession to switch it on.

The device will vibrate twice and the screen with display "AIRSCREAM".

When the device is powered on, if you insert the pod and its successful, the device will vibrate once and the indicator will flash in a breathing pattern once to indicate a successful connection.

If the device is unused for more than 1 hour, the device will vibrate once, and the indicator light will flash white light 5 times before automating locking.

1. If your Airscream Pro II flashes 2 red indicator lights and says "Shorted" on the device display - this means that there is a short circuit in your Pod, please replace your Pod.
2. If your Airscream Pro II flashes a red indicator light 5 times and says "No Atomizer" on the display, your pod is not correctly connected.
3. If your white light flashes 10 times, the device vibrates, and the screen displays "Overtime" then you have pulled on the device for longer than 8 seconds. This forces the device into timeout protection. Once the white lights stop blinking, you can use the device again.

Each puff that lasts more than 0.5 seconds will be recorded on your puff counter. After accumulating every 50 puffs, the device will vibrate once as a reminder.

To reset the puff count on the Airscream Pro II, press the button 4 times in quick succession within 4 seconds.

Press the button 3 times within 2 seconds, and the output power value on the screen will start to fluctuate.

You can adjust the power by pressing the button.

A short press will adjust it by 0.5 watts, while a long continuous press will increase the wattage until the maximum supported wattage.

When connected to power, the device will vibrate once.

The screen will display a charging icon and the indicator light will flash in a white breathing pattern while charging.

When the device is fully charged, the device will vibrate once, the screen will display a full battery icon, and the indicator light will remain solid for one minute before turning off.

The Airscream Pro II (2) device uses the Airscream Pro II / Pro LITE Refillable Pod 2-Pack, which you fill yourself with the e-liquid of your choice. We no longer stock prefilled pods for this device. The Pro II uses the same pods as the Airscream Pro, Pro LITE, and AirEgg devices.